Pressure Recorders

Pressure Recorders

By April 20, 2017Blog, Pressure recorders

 

The Barton weatherproof Model 289A and the explosion-proof Model 291B are differential pressure indicating switches. The 289A has a NEMA-4 watertight die-cast aluminum case (finished with a weather-resistant black epoxy resin paint). The cover lens is secured in the bezel with an elastomer ring to reduce the possibility of accidental breakage. This ring also acts as a seal between the bezel and the case to ensure a moisture, fume and dust-free atmosphere for the indicator and switch mechanism.

 

ITT Barton Model 291B has an explosion-proof case that is certified for Class I, Division 1, Groups B, C & D service. The large cover lens allows maximum readability of the indicating pointer.

 

Switches and all adjustments are readily accessible when the cover is removed. The built-in switches energize either single or dual alarm circuits when the measured differential pressures exceed predetermined limits. These limits may be either maximum, minimum, or both.

 

If you need more information about ITT Barton 289A and 291B please contact our sales department vias info@ittcontrols.com and look at our website: http://ittcontrols.com/brands/itt-barton/

 

Read more 3 8 – 2017

ITT Neo-Dyn Pressure Switches

ITT Neo-Dyn products are used worldwide in various applications. Some of the products of ITT Neo-Dyn are gauge pressure switches, vacuum gauge pressure switches, differential pressure switches and temperature switches. Switches for general use are categorized by NEMA standards. The standard line of Neo-Dyn is one of the broadest in the industry. For the right product or part, you can contact ITT Controls.

ITT Neo-Dyn Switches

Pressure Switches

General Purpose
100P NEMA 4 & 13
101P NEMA 4 & 13
105P/105PP NEMA 1 & 2
110P NEMA 4 & 13
115P/115PP NEMA 4 & 1312
125P NEMA 4 & 13
130P NEMA 4 & 13
131P NEMA 4X & 13
132P NEMA 4 & 13
142P NEMA 4 & 13
200P NEMA 4 & 13
201P NEMA 4 & 13
225P NEMA 4 & 13
231P NEMA 4X & 13
232P NEMA 4 & 13

Hazardous Area
100P Division 2
100P NEMA 4X, 7, 9 & 13
100P NEMA 4X, 7, 9 & 13
110P Division 2
110P NEMA 4X, 7, 9 & 13
112P NEMA 4X, 7, 9 & 13
115P/115PP NEMA 4X, 7, 9 & 13
122P NEMA 4X, 7, 9 & 13
123P NEMA 4X, 7, 9 & 13
125P NEMA 4X, 7, 9 & 13
130P NEMA 4X, 7, 9 & 13
131PX NEMA 4X, 7, 9 & 13
132P NEMA 4X, 7, 9 & 13
142P NEMA 4X, 7, 9 & 13
225P NEMA 4X, 7, 9 & 13
231P NEMA 4X, 7, 9 & 13
232P NEMA 4X, 7, 9 & 13

If you need more information about ITT Neo-Dyn Pressure Switches please contact ITT Controls via info@ittcontrols.com. Check also our website: http://www.ittcontrols.com/brands/itt-neo-dyn/

Read more 28 8 – 2015

ITT Barton Differential Pressure Units

With more than one million BARTON® DPU-based instruments in service around the world today, Cameron’s Measurement Systems pision is a premier supplier of reliable and accurate chart recorders, indicators, switches and pneumatic controllers. Originally developed in the early 1920s, our differential pressure technology features a welded bellows assembly that increases accuracy while dramatically reducing the effects of wear. To facilitate quick and easy repairs all DPU based instruments are supported with pre-calibrated exchange or repaired sub-module bellows assemblies.

GENERAL FEATURES

More than one million Differential Pressure instruments in service around the world
Accurate, sensitive and reliable
Designed to measure differential pressures under the most severe operating conditions
Exceptionally fast response time, self draining, and has built-in temperature compensation.

ADDITIONAL MODEL INFORMATION

Model 199 Differential Pressure Unit

Designed to measure differential pressure as low as 10″ w.c. to 100 psi at SWP from 1,000 to 6,000 psi

Model 224 Differential Pressure Unit

Designed to measure differential pressure ranges from 0 to 30″ w.c. to 0 to 1,000 psi at SWP from 400 to 10,000 psi
Read more 28 8 – 2015

ITT Barton Differential Pressure Units

GENERAL FEATURES

More than one million Differential Pressure instruments in service around the world
Accurate, sensitive and reliable. Designed to measure differential pressures under the most severe operating conditions. Exceptionally fast response time, self draining, and has built-in temperature compensation.

ADDITIONAL MODEL INFORMATION

Model 199 Differential Pressure Unit

Designed to measure differential pressure as low as 10″ w.c. to 100 psi at SWP from 1,000 to 6,000 psi

Model 224 Differential Pressure Unit

Designed to measure differential pressure ranges from 0 to 30″ w.c. to 0 to 1,000 psi at SWP from 400 to 10,000 psi.
Read more

 

ITT

Author ITT

More posts by ITT

Leave a Reply