BARTON
Showing 37–48 of 58 results
BARTON Chart Recorders 242E
The Barton Model 242E Temperature and Pressure Recorder is a flexible and tough tool intended for overall temperature and pressure purposes. It registers the temperature and pressure measured on a graph of 12 inches in diameter. Up to four elements can be used in any mixture to function up to four person tracking pads. The static pressure scheme comprises of a helical bourdon tube linked to the piping of the structure. The static pressure component monitors the static pressure in a tube scheme. Elements are accessible for evaluating pressure varying from 30 in. From void (mercury) to 30,000 psi.The thermal systems are a spiral bourdon tube, a capillary and a bulb. All sections are produced from stainless steel. The bulb is equipped with a bendable expansion and the capillary is shielded by the armor of stainless steel.If you need a different model other than those listed, please contact us
Barton F500 Series Floco Positive Displacement Meter
BARTON Floco positive displacement liquid flow meter uses a rotor configuration that ensures continuous precision even under unfavorable conditions. This specifically measures viscous, waxy, corrosive and abrasive materials to about ± 1% of the normal variability.
The Floco flowmeter tests the liquid by separating and quantifying it into different areas. Via the inlet channel, liquid reaches the meter, where the bridge deflects the liquid down to reach the rotor blades and transform the rotor. The stream then flows into the port at the exit, corresponding with the port at the inlet. The special rotor configuration permits the movement of strong particles and sediment through the meter without risking disruption or malfunction. Bridge seals block the liquid from going to the exhaust port without testing. If you need a different model other than those listed, please contact us at contact@ittcontrols.com. F500-1 I F500-2 I
Barton 288C dp indicating switch
Barton ® 288, 288A & 288C are weather-proof DP switches. NEMA-4 has waterproof die-cast aluminum containers for 288A and 288C (finished with green epoxy resin weatherproof tone). The solid lexan lens is given in the bezel with an elastomer coil to reduce the chance of unwanted breakage. This system also works as a seal between the bezel and the cabinet to ensure movement and alteration of the item sensor’s moisture, smoke and dust-free atmosphere. Six differential stress indicators are used to energize sensors and regulate circuits with pre-determined flux boundaries across pipelines and fluid concentrations within pressurized ships, and lower stress across systems such as filters. They are used to track flux rates in combination with a main DP component, such as a hole or venturi.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. 288A l 288C l 290DBARTON
Barton 199 dp unit
The Barton Model 199 Differential Pressure Unit (DPU) is a mechanical device that correctly measures differential pressure relative to a vapor or liquid flowing through a process system or to the point of a liquid stored in a process tank. The Barton model 199 DPU is linked to a main unit (a venturi, an orifice plate or a fluid pipe) situated in the factory scheme for process stream readings. For liquid level readings, the DPU can be linked in a multitude of ways to assess the variation in stress induced by fluid level differences in the system ship.
The Barton Model 199 DPU is a dual bellows installation contained within pressure housings. The dual bellows installation comprises of two competing interconnected liq-Venting uid-filled bellows, a base plate, connection range springs, overrange valves, torque tube and a torque tube installation. Shaft Pressure housings are linked to the main unit situated in the
Barton 289A dp indicating switch
General The Model 289A weatherproof is a differential pressure switch. The Model 289A has a watertight die-cast aluminum case NEMA-4 (completed with a weather resistant black epoxy resin coloring). The cap lens is provided in the bezel with an elastomer cap to decrease the chance of accidental breakage. This circuit also functions as a barrier between the bezel and the case to provide the sensor and change system with a moisture, fume and dust-free atmosphere. The big screen lens enables the point of identification to be viewed to its maximum. Switches and all modifications are readily accessible when the cover is removed. The integrated switches energize single or dual control systems when the compressive stress evaluated exceeds predetermined boundaries. These boundaries can be either complete, minimal, or both.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. 289ABARTON
Barton 450C dp indicator
The Barton Instruments Model 450C indicates low DP in high static pressure applications. Its 4-1/2″ dial provides excellent readability with economy of space. The M450C is a commercial version of the M316C, used by the U.S. Navy for shipboard measurement of DP, flow, and Liquid level. A rugged 4-1/2 inch (114 mm) indicator that offers economy of space and readability. Available with top/bottom or rears ports.ITT Barton M450C features:Aluminum (NEMA 4) or 316SST (NEMA 4X) and weather-proof dial 4-1/2 inch, 270° arc caseactuated by the 224C DPU Indicating Mechanism.
The indicating pointer traverses a 270° arc, providing excellent readability. It is driven by a precision, jeweled rotary movement that employs a thermally stable Ni-Span-C hair spring. The movement has a micrometer screw for range adjustments. Zero and range adjustments can be made without removing the scaleplate or pointer. Linearity adjustments are easily accessible after removal of the scaleplate.
If you need a
Barton 290D dp indicating switch
Barton ® 288, 288A & 288C are weatherproof DP switches. NEMA-4 has waterproof die-cast aluminum containers (finished with a weatherproof black epoxy resin color) for the 288A and 288C. The durable lexan lens is secured with an elastomer ring in the bezel to reduce the possibility of accidental breakage. This loop also works as a seal between the bezel and the box to ensure moisture, smoke and dust-free atmosphere for the movement and change system of the jewel sensor.
Differential switch indicators are used to energize sensor and regulate circuits at predetermined pipeline flow boundaries, liquid concentrations in pressurizing ships, or stress failures on systems such as filters. They are used for tracking stream rates in combination with a major DP component, such as an orifice or venturi.
If you need a different model other than those listed, please contact us at contact@ittcontrols.com.
288A l 288C l 290D
BARTON
Barton 274A Remote Pneumatic transmitter
The product line of the Barton ® pneumatic transmitters line combines pneumatic transmitters and indicating or recording controllers. All are intended to serve the most stringent and challenging Oil & Gas Production, U.S. Navy Shipboard, and Process Plant applications requirements. The core of the DP-driven instruments is the rugged Barton ® Differential Pressure Unit (DPU)–containing a time-tested liquid-filled bellows and transmission pipe structure. Models for recording and controlling are also accessible with pressure or temperature actuators. Barton ® Pneumatic Transmitters are powered by the M199 Differential Pressure Unit (DPU), which is also accessible in a NACE licensed variant. Barton ® Pneumatic Transmitters are located in a rough, weatherproof situation that is particularly suitable for use in corrosive fume settings. Continuous purging is accomplished since the driver tube and nozzle emissions inside the situation.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. 274A
Barton 232C dp indicator
The Model 232C is an economic DP measure for use in applications where high accuracies are not needed. Suitable for implementations across filters for tank rate, flow rate, and DP. It features a 500 psi (34.5 bar) SWP Maximum and a 0-50 “w.c. to 0-100 PSID (0-124 mbar to 6.9 bar) DP Range. The case and bezel are 304 SST. The housings are forged brass (steel and SST optional) with 1/4″x 1/4 “NPT links. The bellows are BeCu or 316 SST, with Ethylene Glycol and Water Fill. The identifying precision is±2.00 percent of the complete scale.
ITT Barton 232C provides a broad selection of DP configurations (including complete, zero-center and divided distances), secure operating pressure up to 6000 PSI BARTON DPU Sensor, high precision color scale, seal-welded 224C DPU accessible for leak-proof metering and additional one or two tight deadband buttons.
If you need a different model other than those listed, please
BARTON Chart Recorders J8A
The Barton Model J8A Temperature and Pressure Recorder is a flexible and tough unit intended for overall temperature and pressure applications. It registers the temperature and pressure controlled on an 8-inch diameter graph. Up to four elements can be used in any mixture to function up to four individual tracking pads. The static pressure device comprises of a helical bourdon tube linked to the machine piping through tubing. The static pressure component monitors the static pressure of 0-30 inches mercury vacuum to 0-30,000 psi in a piping scheme. The thermal systems are a spiral bourdon tube, a capillary and a bulb. All sections are produced from stainless steel. The bulb is equipped with a bendable expansion and the capillary is shielded by the armor of stainless steel.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. 202E l 202N l 242E al J8ABARTON
Barton 308 Flowmeter pulse transmitter
Similar to the Model 1334 transmitter, the Model 308 transmits a distinct electrical pulse through the BARTON Floco meter to indicate the displacement of a specific amount of air. The rate of pulse propagation can be interpreted to determine flow intensity by calculating the pulses representing the total flow.
Increasing pulse is precisely divisible by a factor of ten for Model 308 to enable either very basic or specialized remote devices to translate the pulses into specified units of measurement. Available pulse rates of 1 to 1,000 pulses per barrel or 1 to 100 pulses per gallon can be used to operate electrical clocks, batch clocks or to track pumps, engines, valves or solenoid-actuated equipment in combination with one another. If you need a different model other than those listed, please contact us at contact@ittcontrols.com. BARTON
Barton 224A dp unit
The Barton Model 224A Differential Pressure Unit (DPU) is a mechanical device that monitors the parallel differential pressure of a gas or liquid passing through a process system or the amount of liquid stored in a process tank. The DPU is connected to a primary device (e.g., venturi, orifice monitor, or stream pipe) in the factory-stream assessment method system. For liquid concentration readings, the DPU can be linked in a multitude of respects to evaluate the range of stress induced by fluid density differences in the unit ship.
The Barton Model 224A DPU is available in distinct stress results to assess specific ranges between 0-30 inches of water column and 0-1000 psi, with safe job stress (SWP) results of 500 to 10,000 psi (224A Non-C limited to 500 to 3,000 psi SWP). Table 1-1, paragraph 4. The 224AC Bellows Unit Assembly (BUA) is produced in three dimensions: 1-5/8 inch, 5/8 inch
