BD-RMG 470 – KrysalisTM

The RMG 530-P flow control valve works with electronically controlled flow or pressure control. As the valve sleeve and extension sleeve only need to be removed from the body, RMG 530-P the central valve is easily maintained. The valves are controlled by the inlet pipe dia.DN 200 and upwards are for axial flow and therefore a safety shut-off valve can not be used.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. DN 80/80 l DN 100/100 l DN 150/150 l DN 200/200 l DN 250/250 l DN 300/300RMG

RMG 218 Gas stress control is used for manufacturing and system applications. The system is highly adaptable for manufacturing and process applications. RMG 218 is also ideal for natural gas and for all non-corrosive gaseous materials. Compared to RMG 214, the two-stage proportional control device is designed for high pressure falls with good regulation precision: inlet pressure differences contribute only to very minor outlet pressure anomalies, close shut-off at zero flow (only for plastic sealing valves) with security relief valve (SBV) at the 1st control phase, simple operation and maintenance without DVGW authorization. If you need a different model other than those listed, please contact us at contact@ittcontrols.com. RMG

The RMG 333 gas pressure regulator (operating directly without auxiliary power) has the function of maintaining the outlet pressure of the gas medium in the connected outlet side of the pipeline (regulated segment). This is largely consistent, regardless of interventional conditions, such as adjustments in inlet pressure and/or shifts in fuel take-off.The full working system is easy to remove from the GPR actuator housing when the screw fasteners are loosened and visually inspected during service rounds. In the event of a failure, the operational equipment can be easily replaced by new controlled systems and the required maintenance work is moved from the gas pressure regulator to the laboratory. The actuator of the control unit may have specific diameters of the location of the valve. Pressure-equalized variants of the valve bench. The regulator system can optionally be equipped with an SBV leakage gas or a safety diaphragm. The outlet pressure to

The RMG 322 gas pressure regulator is a Direct-acting Gas Pressure Regulator with Incorporated Direct-acting SSV. In RMG 322, the governed production force is driven from the point of measurement to the bottom of the diaphragm. This measures the true peak stress and compares it with the adjustable spring voltage system. Each difference influences the location of the key valve directly through the sequence of the valve. As a result of the current changes, the actual performance stress is compared to the setpoint value.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. RMG