RMG Turbine meter TRZ 03-TE/TEL

TRZ 03-TE / TEL Turbine meter uses the rotor movement generated by the turbine wheel and is transmitted from the pressurized meter to the unpressurized meter head by means of a magnetic coupling. The number of rotations is reduced with the gears in the meter frame, which can be changed by choosing a correct series of gear changes, so that the mechanic totalizer reflects the cubic meters under fluid conditions. The reed brush (or inductive sensor) of the mechanical totalizer generates low-frequency pulses, the quantity of which, under actual conditions, is proportional to the size. The turbine wheel (HF 3) and the reference wheel (HF 2) are measured by high-frequency inductive sensors. The latter is a cam wheel on the same shaft as the turbine wheel that is capable of controlling the turbine engine. The gas meter operates without a meter head in the TRZ 03-E configuration. This gas meter has only the HF 2 and HF 3 wireless pulse transmitters instead of the conventional totalizer.

If you need a different model other than those listed, please contact us at contact@ittcontrols.com.