BD-RMG 800 Gas pressure regulator

The RMG 219 pressure regulator is an all-round gas regulator. If the master automation mechanism, i.e. the closed control circle, deviates, the magnetic force varies and the angle between the nozzle and the valve piston shifts. Due to a change in the voltage controlling load, the pressure changes proportionally and therefore the gas level regulator opens. In the governed section, the flow rate and/or pressure is equivalent to the specified setpoint. The RMG 219 pressure regulator can be controlled simply by hand under all circumstances, thus preserving the pressurized equilibrium on the valve plate before the main valve is released. It is not permitted to use spare parts or lubricants other than those expressly listed in this RMG Spare Parts Operation and Maintenance Manual.If you need a different model other than those listed, please contact us at contact@ittcontrols.com. RMG

The RMG 402 gas stress regulator has been designed with the goal of keeping the output tension of the gaseous medium in the mains steady and free of detrimental effects such as adjustments in the inlet pressure and flow rate. The system can be provided with an incorporated or a different pilot module. The independent pilot (RMG 630 RMG 640) is linked to the key regulator by several pulse and working boards. The upstream buffer prevents the pilot from impurities. A defense cut-off feature can also be mounted in the regulators originally supplied without a security cut-off. The small number of integral parts allows easy maintenance of the control assembly: the top part of the body can be easily removed and the control diaphragm, the only control item exposed to injury, can be quickly checked without having to remove the control diaphragm from the board. The protection cutting system

RMG 200 Gas Pressure Regulator supplied by RMG is built for municipal, and individual consumers. RMG 200 regulator is suitable as regulator for low rate gas reduction stations . Additionally, the unit is applicable for outlet pressure control, inlet pressure control, outlet and differential pressure control. RMG 200 has a simple construction and it is easily maintained. Various orifices sizes available for order. The unit is suitable for high pressure cuts and operated by high quality pilot series RMG 610 (RS 10 d) and RMG 650. If you need a different model other than those listed, please contact us at contact@ittcontrols.com. 300 l 300 t RMG

The RMG 333 gas pressure regulator (operating directly without auxiliary power) has the function of maintaining the outlet pressure of the gas medium in the connected outlet side of the pipeline (regulated segment). This is largely consistent, regardless of interventional conditions, such as adjustments in inlet pressure and/or shifts in fuel take-off.The full working system is easy to remove from the GPR actuator housing when the screw fasteners are loosened and visually inspected during service rounds. In the event of a failure, the operational equipment can be easily replaced by new controlled systems and the required maintenance work is moved from the gas pressure regulator to the laboratory. The actuator of the control unit may have specific diameters of the location of the valve. Pressure-equalized variants of the valve bench. The regulator system can optionally be equipped with an SBV leakage gas or a safety diaphragm. The outlet pressure to