RMG 332 Gas pressure regulator
Unit tracks the actual outlet stress level and contrasts it with the specified spring quality. The regulatory variation has a direct effect on the location of the actuator via the valve screw. The subsequent adjustment in the present allows the real exit stress level to be equalized with the setpoint. The process is securely at zero consumption and the pressure of closure is unchanged. When the outlet pressure in the controlled section reaches or drops below the trigger stress, the inlet side safety valve actuator prevents the stream of the air. The SSV diaphragm with the toggle sleeve moves in the correct position of the rotor, remove the SSV valve rod from the ball ratchet device and activate the SSV actuator. The SSV can be changed manually only if the output pressure at the measurement point differs from the trigger voltage set-up to the given reset variations.