RMG 408 Gas pressure regulator
To addition, the stream straightener and the wrapping are used to maximise the vibration operation in the output section of the actuator housing. In addition, the “carbon gel” circle can be integrated into the throttle structure with an external noise reduction of at least 10 dB (A). The traditional opening structure can be easily replaced by a metal oxide foam opening. Nonetheless, when using metal filler, it is important to note that the KG quality is correspondingly reduced. The safety valve actuator on the input side interrupts the gas flow when the output pressure in the regulated device exceeds or drops below the preset reaction rate. The RMG 408 gas pressure regulator will potentially be paired with the RMG 720 or RMG 721 feature modules. The SAV can be triggered by hand if the peak tension at the sensor location is below (when the voltage is exceeded) or above (when the force is below) the reset variations are reached.